泉州泉港移动螺杆空压机租赁

泉州泉港移动螺杆空压机租赁厦门川野机械有限公司张经理：I59 8O88 5OI6。
泉州泉港移动螺杆空压机租赁Time：2019-08-06 09:39:18???????来源：
　　螺杆空压机在正常使用中有温度。如果温度高于5-8，说明油流不足，油路堵塞，或者温控阀没有完全打开。请检查机油滤清器。

　　Screw air compressor has temperature in normal use. If the temperature is higher than 5-8, the oil flow is insufficient, the oil pipeline is blocked, or the temperature control valve is not fully opened. Please check the oil filter.
　　如果温差小于正常范围,证明了冷却,水冷机,请检查是否缺水,水温过高,水冷却器水垢、是否内部冷却油垢,风冷,请检查散热器是否太脏,是否异常冷却风扇,风量,是否有管导管堵塞,是否管太长,不是接力风机,继电器风扇没有打开或继电器风扇的错。
　　If the temperature difference is less than the normal range, it proves that the cooling and water cooler are short of water, the water temperature is too high, the scale of the water cooler, the internal cooling grease scale and the air cooling, please check whether the radiator is too dirty, whether the abnormal cooling fan, the air flow, whether the pipe duct is blocked, whether the pipe is too long, not the relay fan is not turned on or not. The fault of relay fan.
一些模型油流量调整,请调整到大,检查温控阀是否正常,您可以删除阀芯,关闭温控阀头,迫使油冷却器,如果上面的方法无法解决,我们将考虑是否有异物阻塞石油路。
　　Some model oil flow adjustments, please adjust to the maximum, check whether the temperature control valve is normal, you can delete the spool, close the temperature control valve head, force the oil cooler, if the above method can not be solved, we will consider whether there is foreign matter blocking the oil pipeline.
　　散热器是否有油脂。如果温度差异是在正常范围内,机器仍然是高温,表明热头产生的超出了正常范围,应检查是否超压运行,石油是否错了,石油是否老化,甚头部轴承问题是否结束摩擦。
　　Is there any grease in the radiator? If the temperature difference is within the normal range, the machine is still at high temperature, indicating that the heat head generated is beyond the normal range, we should check whether the overpressure operation, whether the oil is wrong, whether the oil is aging, and even whether the head bearing problem ends friction.